How much rock do I need to cover an area?

So if your project is 18 feet long by 20 feet wide, your coverage area is 360 square feet. Next decide how deep you want your coverage.

How much landscaping rock do I need?

Material	Suggested Depth	Coverage Area per 1 ton
3”-8” rock	3”-8”	60 square feet
1”-3” rock	1”-3”	80 square feet
3/4”-1” screened gravel	2”	100 square feet

Thereof, how do I calculate how much rock I need?

How to Calculate a Cubic Yard of Rock

Measure the length and width, in feet, of the area to be covered.
Multiply the length by the width to get the square footage.
Measure the depth you want, in inches--how high you want the layer of crushed granite or other rock.
Divide this by 324, the number of inches in a cubic yard (a cubic yard is 27 cubic feet).

Similarly, how Much Stone do I need to cover an area? Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Likewise, people ask, how many square feet does a ton of rock cover?

One (1) ton of river rock covers approximately a 50-75 sq. ft.

How do I figure out how much landscaping rock I need?

Divide the desired depth for your landscape rock in inches by 12 to convert it to feet. For instance, if you want the rock to be 2 inches deep, divide 2 by 12, which equals 0.1667 feet. Multiply the length by the width by the desired depth in feet for your landscape rock to find the number of cubic feet you will need.

How much will a ton of gravel cover?

How Much Does A Ton Of Gravel Cover? When laying the recommended gravel-layer depth of 4", then a ton of pea gravel covers an area of 40 to 50 square feet. Spreading out 1-ton of gravel at 2" deep covers 80 to 100 square feet, while 6" deep covers 25 to 35 square feet or less if you use larger stones.

How much does it cost to install river rocks?

Professional landscaping contractors typically charge $45 to $75 per hour for ground preparation and installation. On average, expect it to take two hours to place one ton of stone, for a total cost of $90 to $150 for labor, not including delivery. Cost to deliver and install rocks averages $300 to $350.

How many yards are in a ton?

A cubic yard is equal to 27 cubic feet. You can use the online calculator to determine how many cubic yards of material are required. As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

How thick should landscaping rock be?

A: Our general rule of thumb is one yard of rock will cover 100 square feet at a depth of approximately 2 inches.

How many yards of rock are in a ton?

A general rule of thumb when converting cubic yards of gravel to tons is to multiply the cubic area by 1.4. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In addition, there are 2,000 pounds to a ton. For instance, if your area to be landscaped is 100 cubic yards, multiply that by 1.4.

How many yards of rock do I need calculator?

Multiply the length, width, and height together to find the volume of the space. Now, convert the volume to cubic yards. If the initial measurements were in inches, then convert cubic inches to cubic yards by dividing by 46,656. If the initial measurements were in feet then divide by 27 to get cubic yards.

How many tons of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How much will .5 cubic feet cover?

Coverage Chart- Bagged Material (2 Cubic Foot Bags)

Depth	One 2 Cubic Foot Bag Covers
2”	12 sq feet
3”	8 sq feet
4”	6 sq feet
5”	4.8 sq feet

What is the cheapest rock for landscaping?

Landscaping Rock Prices

Landscape Rock Type	Minimum Cost	Maximum Cost
Crushed Granite	$50/cubic yard	$70/cubic yard
Pea Gravel	$2/bag	$3/bag
River Rocks	$0.05/pound	$0.35/pound
Mexican Beach Pebbles	$20/bag	$30/bag

How many square feet will 5 tons of gravel cover?

How much landscaping rock do I need?

Material	Suggested Depth	Coverage Area per 1 ton
3”-8” rock	3”-8”	60 square feet
1”-3” rock	1”-3”	80 square feet
3/4”-1” screened gravel	2”	100 square feet
5/8”-1/2” screened gravel	2”	120 square feet

How many square feet will 20 tons of gravel cover?

240 square feet

How much is a ton weigh?

Ton, unit of weight in the avoirdupois system equal to 2,000 pounds (907.18 kg) in the United States (the short ton) and 2,240 pounds (1,016.05 kg) in Britain (the long ton). The metric ton used in most other countries is 1,000 kg, equivalent to 2,204.6 pounds avoirdupois.

What is a yard of stone?

While a yard of stone weighs around 2,500 pounds (A ton and a quarter). A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth. It's a very helpful ratio because when spreading mulch, a depth of 3 inches is considered ideal.

How many bags of mulch make a yard?

13.5 bags

How do you measure gravel?

Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.

How much is a yard of sand?

Total costs between $325 and $1,108. Topsoil costs $12 to $55 per cubic yard. Fill dirt ranges from $7 to $12 per cubic yard. Sand typically falls between $15 and $40 per cubic yard.

How much does a yard of 3/4 inch stone weigh?

Crushed Stone Considerations Ask your supplier what figure is used for the weight of the stone per cubic yard. The figure may vary from around 2,700 to 28,00 pounds per cubic yard. Some companies will just use a round figure of 3000 pounds per cubic yard.

How much gravel do I need for concrete slab?

A minimum thickness is 4-6 inches of well compacted gravel should be your target. Any more depth of gravel is ok with the proviso that it be well compacted.