Why is my nail gun not shooting nails all the way?
Why is my nail gun not shooting nails all the way?
If your nailer isn’t sinking nails deep enough, check the driver, o-ring, seal, bumper, springs, oil, trigger valve, and piston ring. Review our troubleshooting guide for tips on how you can fix your nailer yourself. Inspect the seal for wear and damage. Replace the seal if necessary.
Why is my Paslode nail gun not firing?
The nail gun isn’t firing or is firing intermittently. Misfiring is the most common repair that we conduct. Possible causes for a Paslode nail gun not firing are: The nailer needs cleaned – especially if it has been used a lot without regular cleaning!
How to troubleshoot a Paslode framing Nailer?
You may have something wrong with the fan motor or the wires going to the fan motor. See if the wires are pinched or broken. If this is not the problem, disconnect the small white connector on the wire assembly that leads to motor and then put it together again. Kelly Seiler has been a freelance writer and editor in Texas for the past 10 years.
What should I do if my framing Nailer is not working?
As with any framing nailer, however, you are bound to run into some questions. Try troubleshooting your problems on your own before you call in a repairman. Check that you have not run out of fasteners if the nailer fires no nail has been driven. A nail jam may also be preventing the fasteners from moving forward.
Why does my Paslode Nailer make a poof sound?
If you have a cordless nailed, it may need to be cleaned. Remove the fuel and the battery and clear any jammed nails from the nailer if the makes a “Poof” sound when you fire it. Check to make sure the driver blade is in the down position. This is necessary or the tool will not fire.
The nail gun isn’t firing or is firing intermittently. Misfiring is the most common repair that we conduct. Possible causes for a Paslode nail gun not firing are: The nailer needs cleaned – especially if it has been used a lot without regular cleaning!
Can a Paslode finish Nailer be used with a nail feed?
Paslode finish nailer fires but no nail – Feed compatible fasteners and check that the magazine follower slides freely. Clean the tool to remove debris. Also clear any unnoticed nail jams. Finally, increase air flow and reduce/extend length.
As with any framing nailer, however, you are bound to run into some questions. Try troubleshooting your problems on your own before you call in a repairman. Check that you have not run out of fasteners if the nailer fires no nail has been driven. A nail jam may also be preventing the fasteners from moving forward.
If you have a cordless nailed, it may need to be cleaned. Remove the fuel and the battery and clear any jammed nails from the nailer if the makes a “Poof” sound when you fire it. Check to make sure the driver blade is in the down position. This is necessary or the tool will not fire.
