What sizes do peg boards come in

Pegboard hooks come in two sizes, 1/4 inch and 1/8 inch, which is the measurement of the diameter of the wire used to make the pegboard hook. You can use smaller 1/8 inch pegboard hooks in the larger 9/32 hole pegboard holes, but you can not use the 1/4 inch pegboard hooks in the smaller 3/16 hole pegboard.

Does pegboard come in different sizes?

Pegboard holes come in two sizes: either the larger 9/32 inch holes or the smaller 3/16 inch holes. The larger 9/32 holes are for accommodating 1/4 inch peg hooks but can also hold the smaller 1/8 inch peg hooks.

How do I choose a pegboard?

Choosing the Right Pegboard Material Acrylic pegboard is a good choice for the sake of durability, but wood and fiberboard pegboard systems are simple enough to make from scratch. Metal pegboard systems are great for heavier loads, but they are more expensive and require a sturdier means of support to mount them.

What size is standard pegboard?

Pegboard is produced from hardboard and HDF (High Density Fiberboard). Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″).

What thickness is pegboard?

Two common thicknesses for pegboard hangers are 1⁄8″-dia. and 3⁄16″-dia., both of which fit into standard pegboard hole configurations.

Why is pegboard so expensive?

Wood pegboards are the most expensive type of pegboard because they have a decorative look. … Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.

Are all pegboard holes the same size?

Pegboard hole spacing is standardized so the hooks will fit. What is NOT standardized is the hole size. There are 1/8; 3/16; and 1/4 pegboards out there.

What material is best for pegboard?

Generally made out of compressed wood fiber and resin, then coated with thin layer of oil. Being so common, Masonite pegboard is the most readily available types of pegboard and can be found at most hardware and home improvement stores.

How much space do you need behind pegboard?

Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted. Plastic and metal pegboard panels have this space built in, created by the L-shape flanges at the edges.

Can you wallpaper over pegboard?

Wallpaper The Front Of the Pegboard Then glue it onto the front of the peg board. The wallpaper glue instructions may say to put the glue onto the wall/pegboard, but in this case you want to brush it onto the wallpaper. Otherwise, you will end up with a lot of glue squishing out through the peg board holes.

Article first time published on

Can I paint pegboard?

When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. … Ideally, you’ll use a professional paint sprayer.

How do you hang pegboard spacers?

Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you’re not using a spacer kit, use 2-inch washer head wood screws.

How do you use a pegboard Peg Lock?

Easy to use: Simply push the Pegitz part into any standard 1/4″ wood pegboard hole and then insert the hook or peg. Works with existing pegboards and hooks! Just insert between the two.

What board is used for pegboard?

Pegboard Materials Pegboard is typically constructed from one of three materials: wood-based composite such as particleboard or MDF, solid wood or plywood or steel. The pegs are made from the same materials, while hooks used to mount tools or merchandise are made of metal.

Can Command Strips hold pegboard?

I recommend that you use the 16 lb Command strips to hang your IKEA pegboard. Separate strips by tearing the pieces apart, do not fold. Line up two strips and click them together. You’ll need six sets for the bar and one set for each spacer.

How do you build a pegboard wall?

1. Step 1 – Locate Wall Studs to Attach Pegboard. …
2. Step 2 – Cut and Attach 1×3 Around the Perimeter of DIY Pegboard Wall. …
3. Step 3 – Attach the Middle 1×3 Boards. …
4. Step 4 – Frame Around Wall Plug. …
5. Step 5 – Install the Largest Pegboards Pieces First. …
6. Step 6 – Install the Remaining Smaller Pegboard Pieces.

Which side of the pegboard faces out?

Cut and Prepare the Pegboard and Furring Strips thickness. If necessary, cut the pegboard panel to the exact dimensions using a circular saw or jigsaw. Place the pegboard with the façade facing down (the “back” facing up) to keep it clean.

Can you paint masonite pegboard?

You should use a glossy paint. Chances are, your pegboard is going to get wet now and then. The glossier your paint, the more resistant the board will be to water. … Because we were using such a dark color (navy!), we had to give the board three thin coats of painting, waiting 30 minutes between each coat.

Can you paint Skadis pegboard?

If you’re not going to cut the boards, you can just paint the rail black and use it.

How do you hang a picture on a peg board?

You can easily hang artwork by using a string on the back of the canvas or by simply placing two notch hooks on the same row of pegboard holes to create a stable pegboard easel display. Note – There is about 1/4″ of space between the front notch of the hook and the back of the pegboard.

Do you have to Prime pegboard before painting?

Similar to painting walls or furniture, it’s important to use primer first. So first I gave the face of my pegboard a quick coat of Zinsser Primer. Once it was dry, I added 2 coats of my desired taupe-y color (I mixed a few hues to get the color just right).

How big are pegboard holes?

When purchasing your pegboard, make note of the hole size. Some have 1/4- inch holes, while others have 1/8-inch holes. The hole size will determine the type of hooks you need. Your home center will have a wide assortment of pegboard accessories, all of which can be quite useful.