What do I do if my blinds are too wide?

What do I do if my blinds are too wide?

Cutting down the slats

1. Align the slats so that they are even.
2. Using a clamp or rubber bands, secure the slats together into position.
3. Wrap the slats with masking tape to prevent chipping.
4. Measure where you want to cut and mark a line with your pencil.
5. Lay them on the saw and line up the blade where you need to cut.

Can you trim the width of a Venetian blind?

Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.

Can you trim blinds width?

Don’t get blinds that are so wide that you will cut too close to the strings when they are trimmed. Don’t worry about cutting the headrail neatly. It’s hidden by the valance when it’s installed. On an inside mount, cut the blinds 1/2-inch less than the width of the inside of the window frame.

How can I make my Venetian blinds tighter?

Flip horizontal blinds upwards. Instead of closing blinds the traditional way, which would be pulling the front cord to make the blinds slant downward, turn the blinds up with the ridges facing the ceiling by pulling on the back cord. This will provide a tighter fit for the blinds and let in less light.

Can Venetian blinds be shortened?

Shortening Venetian Blinds is pretty simple and it can be done on your own at home. By opting for made to measure blinds, you’ll eliminate the need to make alterations.

Can you tighten blinds?

Unroll the blinds halfway and remove them from the brackets. Grip the pin on the spring end of the blinds with pliers and turn the pin clockwise until it tightens. Slowly turn the pin counterclockwise until the ratchet mechanism on the interior of the roller blind catches and holds it in place.

What is the correct way to close Venetian blinds?

The direction ⁠— up or down ⁠— to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.

What saw to cut blinds?

Make the mark – Place one side of the measuring tape on top of the roller blinds’ round top (i.e., the one with the metal pin).