What color wires go together for a ceiling fan?
What color wires go together for a ceiling fan?
black wire
The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. Copper or green wire is the ground wire and keeps your fan from experience power surges.
What is the blue wire on a Hampton Bay ceiling fan?
The standard Hampton Bay ceiling fan without a remote control has a straightforward wiring diagram. The black wire on the fan is the fan-supply wire, and the blue wire is the light-supply line. The black and blue wires on the fan are twisted together with the black wire from the house wiring.
When hooking up a ceiling fan where does the blue wire go?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.
Can I connect blue and black wires together?
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
Can I put red and black wires together?
If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.
Do I connect the blue wire to the black wire?
Connect the blue wires together or the blue wire to the black wire for lights. Follow the same step for ceiling fans without lights. This will allow you to add a light kit later on without having to rewire the fan. Tuck the wires back into the box.
Does a ceiling fan need 3 wires?
Wiring a ceiling fan with four wires is the most common. However, an additional color wire might be included. Copper or green wire is the ground wire and keeps the fan from experience power surges. If there is a blue and black wire coming from the household circuit, there should be two switches on the wall.
