How do I connect my Polycom trio 8800?

How do I connect my Polycom trio 8800?

On Trio 8800 Speakerphone, go to Settings > Advanced > (enter MAC Password) > Network Devices. Under Available Devices, tap the Trio Visual+ named FEO3AE. To complete the pairing, tap the Pair button again on the Trio Visual+. If pairing is successful, a video should appear on the monitor or TV.

How do I set up my Polycom trio?

Setting Up Polycom Trio 8800 Conference Phone

1. Connect the handset to a port as you would do with a regular handset.
2. Once the handset has booted up, select ‘Settings’
3. Select ‘Advanced’
4. Enter Password = 456 then select Done.
5. Select ‘Administration Settings’

How do you use a trio 8800?

How-to setup Polycom Trio 8800 & 8500 for Zoom & OpenSIP

1. Press Settings Key.
2. Select Advanced.
3. Enter the Admin Password (default 456)
4. Select Administration Setting.
5. Scroll down.
6. Select Web Server Configuration.
7. Enable Web Server. Web Config Mode “should” be HTTPS only for added security.

How do I activate my Polycom trio 8500?

The interface can be manually enabled but Polycom strongly recommends changing the default Admin Password of 456.

1. On the RealPresence, press Settings.
2. Select Advanced.
3. Enter the Admin Password.
4. Select Administration Settings.
5. Scroll down and select Web Server Configuration.
6. Enable Web Server.
7. Back out and Save.

Is the Polycom Trio 8800 Wireless?

You can wirelessly connect the Polycom Trio 8800 to your network using Wi-Fi, which is disabled by default. When you enable Wi-Fi, the system reboots.

How do you reset a Polycom Realpresence trio 8800?

rebooting the Trio and once the Polycom logo appears press all 4 corners of the screen. Wait until the Mute LED flashes and then let go and the unit will factory restore.

How do I update my Polycom Trio 8500 firmware?

Polycom Trio 8500 & 8800 update procedure

1. Open your browser and navigate to your Polycom Trio IP address (ex: 192.168.1.231)
2. Enter the Admin password (“456” = default password)
3. Utilities –> Software Upgrade.
4. Click on “Check for software upgrade”
5. Scroll down and select the latest version.
6. Click “Install”

How do I reset my trio 8500?

Factory Reset

1. Press the Menu or Home button.
2. Select Settings > Advanced.
3. Enter 8647 for the password. If this does not work, try 456 or contact Customer Support for assistance.
4. Select Administrative Settings > Reset to Defaults > Reset to Factory > Yes. Result: The phone will automatically reboot.

How do I pair my Polycom?

1 On your phone, navigate to Settings > Features > BToE PC Pairing. 2 Select Pairing Mode, then select Manual. 3 On your computer, click the Polycom BToE Connector desktop icon to start the application. 4 Right-click the application icon , then click Pair with Phone.