How do I connect my DStv to Xtraview?
How do I connect my DStv to Xtraview?
First, connect the coaxial cable of each decoder to the smart LNB. If you have recent or newer decoder models then use the uni-cable ports on the smart LNB. Otherwise, if you have old decoder models then you can use the universal port. Remember Explora decoders use the uni-cable ports.
How do I connect my DStv Explora with extra view smart LNB?
Using a coaxial cable, connect all decoders and run them to the smart LNB. If the decoders in your extra view connection are new models, use the uni-cable port to connect to the smart LNB. Once connected, both decoders will begin receiving a signal, and you can proceed to the installation wizard.
How do I connect DStv to two TVs?
All you need is an RG6 cable. It will run from the output port in your signal splitter and into the port on your TV. Your connection will be complete, and you can begin watching all your shows on these different TVs after running the installation wizard.
How do I activate extra view?
You can also check the status of your connection to ensure it is working. On your remote, click the “Help” button and scroll to the “General Information” option. Click on it and select the “Extra View” option. If your connection is correct and activated, it will be displayed here.
How do I connect XtraView Explora and HD PVR?
You should first ensure you have a coaxial cable for both decoders and a Smart LNB device. The Explora is very convenient in this connection since it offers a range of connecting options. To make the connection, you can connect through the uni-cable ports on both decoders.
Which decoders are XtraView capable?
XtraView
- When linking 2 decoders you can use a combination of 11 series single view decoders, DStv HD Decoder, SD PVR, HD PVRs (all models) and the DStv Explora.
- When linking 3 decoders you can use a combination of the DStv Explora and the DStv HD Decoder.
What is a smart LNB cable?
From a technical viewpoint, the DStv Smart LNB combines the features of a DStv Switch into a single UniCable LNB and offers a single cable solution for distribution of multiple satellite signals.
What is DStv splitter?
This Active RF Splitter is used to connect 3 x Explora’s / HDPVR / Multichoice Decoders on DSTV XtraView. You will run a coaxial cable from the RF out port on each of your three decoders into the input of this splitter. This splitter also have two outputs that can run to aditional RF splitters to run to multiple TV’s.
Is a diplexer the same as a splitter?
The difference is that a splitter takes in one signal and makes two out, while a diplexer or combiner takes in two signals and makes one out. Splitters are commonly used for adding a second television to an existing cable. You’re sending half as much signal through each line when you split out the signal.
Is DStv extra view free?
With XtraView, you can link either two or three decoders together under ONE subscription (and only pay a monthly Access Fee for the other decoders). If one of the decoders is a PVR, you are already paying an Access Fee, so don’t need to pay any more – this means that monthly viewing on your second decoder is FREE!
