How do I clear the configuration on an HP switch?

How do I clear the configuration on an HP switch?

Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on. Continue to press the Clear button while releasing the Reset button. When the Self Test LED begins to blink, release the Clear button.

How do I reset my switch settings?

Hold the “mode” button on the front of the switch for 10 seconds. The lights will blink then go solid – the switch completely wipes all configuration and then reboots.

How do I factory reset my HP ProCurve 2626?

Factory Reset When enabled, the switch can be reset to factory defaults by depressing the “Clear” and “Reset” buttons together, releasing the “Reset” button while holding the “Clear” button down, and releasing the “Clear” button as soon as the “Test” light begins to flash rapidly.

How do I factory reset my HP Procurve 2524?

To execute the factory default reset, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clearbuttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to flash, release the Clear button.

How do I remove running config from Brocade switch?

Tap the “Enter” key a few times and the Brocade command prompt will display. Type the console password if requested and press the “Enter” key. Type “configDefault” and press the “Enter” key. The switch configuration is now reset to factory default settings.

How do I factory reset my Nexus switch?

Resetting the Cisco IP switch to factory defaults

1. Reset the switch to factory defaults: Erase the existing configuration: write erase. Reload the switch software: reload.
2. Save the configuration: IP_switch-A-1# copy running-config startup-config.
3. Reboot the switch and wait for the switch to reload: IP_switch-A-1# reload.

How do you reset an unmanaged switch?

Generally, unmanaged switches have nothing to reset since none of the settings on them can actually be changed. The best you can do is to try different ports and turn the device off and then back on. If that doesn’t work, then its time to throw it away and get a new one.

How do I reset my HP 2930f switch?

Restore the factory default configuration

1. Press Clear and Reset simultaneously.
2. While continuing to press Clear, release Reset.
3. When the Global Status LED begins to fast flash orange (after approximately 5 seconds), release Clear.