Do OSHA standards apply to general industry?

Do OSHA standards apply to general industry?

OSHA uses the term “general industry” to refer to all industries not included in agriculture, construction or maritime. General industries are regulated by OSHA’s general industry standards, directives, and standard interpretations.

What should the lighting levels in a workplace be?

In general, the more detailed the task, the greater the light requirement. A process control room should be lit at an illuminance of 300 lux, a corridor or walkway may only require 50 lux, whilst studying an engineering drawing may require 750 lux (see HSG38 Lighting at Work).

What is the minimum illumination level is required in workplace?

The minimum illumination required for general lighting in general construction areas, warehouses and workplace hallways and corridors is five candle-feet. Physical plants, shops, machining areas, equipment and work rooms is 10 candle-feet, and office areas require at least 30 candle-feet of illumination.

Is it against OSHA to work in the dark?

In any dark area that does not have permanent or temporary lights, where lights are not working, or where lights are not readily accessible, the employer shall provide portable or emergency lights and ensure that employees do not enter those areas without such lights.

What is general industry standard?

The general industry standard, 1910.28(b)(1)(i), states that employers must ensure that each employee on a walking-working surface with an unprotected side or edge that is four feet or more above a lower level is protected.

What are the four categories of OSHA standards?

There are four groups of OSHA standards: General Industry, Construction, Maritime, and Agriculture. (General Industry is the set that applies to the largest number of workers and worksites). These standards are designed to protect workers from a wide range of hazards.

What are the lighting requirements?

General Lighting Requirements First-aid stations, offices, and infirmaries: 30 foot-candles. General construction plants and shops: 10 foot-candles. General construction area: 5 foot-candles. Warehouses, walkways, corridors, exits, and other indoor spaces: 5 foot-candles.

What is adequate lighting?

For the purposes of the Home Quality Mark, ‘adequate lighting’ refers to: External lighting that is designed to provide illuminance levels that enable users to perform outdoor visual tasks efficiently and accurately, especially during the night.

What is considered adequate lighting?

Adequate lighting means a light intensity of 20 foot-candles (approximately equivalent to a 60 watt bulb at a clear distance of 5 feet). Sample 1. Sample 2. Sample 3. Adequate lighting means there is enough light to allow ease in cleaning and provide a safe, well-lit work place.

What is OSHA in general?

OSHA’s mission is to ensure that employees work in a safe and healthful environment by setting and enforcing standards, and by providing training, outreach, education and assistance.